Mix dark green and blue. Basics of color: how to get green? Mixing colors: subtractive colors

When taking their first steps in working with decor, most artists are faced with the problem of the lack of many shades in standard sets paints Yes and in Everyday life The need to obtain different tones arises quite often: from choosing the color to paint the walls in the house to choosing the perfect eye shadow. However, do not be upset if your existing arsenal of paints does not contain the necessary element. Remember, with only three basic colors: yellow, blue and red, you can get any shade existing in nature. So, to get orange, you just need to mix two basic colors: red and yellow, and also become familiar with some of the nuances that artists use when mixing paints.

First, let's prepare everything you need. You need to bring:

1. surface for mixing (for example, a palette);
2. yellow and red paint;
3. brushes;
4. canvas or other work surface on which the resulting material is planned to be applied (watercolor paper, pastel paper, etc.).

To ensure the final color is perfect, before starting work, make sure that the surface is cleaned of foreign particles (lint, dust particles, brush hairs, etc.). You also need to immediately decide which method you plan to obtain the desired orange tone. If mixing is done on paper, the final shade is obtained by overlapping the tone after applying one layer of composition to another. If you mix colors on a palette or in jars, the result is a separate new tone.

Receipt process

To get the orange color by combining shades on paper, you first need to decide what you want to get in the end. Because if you apply yellow on top of red, the resulting tone will be darker than if you apply red on top. It is also important to ensure that the mixing brush is clear of any extraneous shades, because... the presence of paint of a different color on the brush hairs can give a completely unexpected result.
The same rule must be followed if you are planning to get the required orange color in dry painting. Just apply layers of red and yellow on top of each other and then rub together. The resulting shade will entirely depend on what color layer was applied on top: if the last layer was yellow, then the orange will be lighter, if red, a red-orange tone will be formed.

When mixing paints on a palette, the situation is somewhat simpler. You need to apply a little of one base paint and another to it, and then mix with a palette knife (a special small spatula). A regular brush will work, but again, make sure the brush is free of other paints.

Completely different mixing rules must be followed if you work with oil paints. To make the final color orange, you need to apply the yellow and red strokes very close to each other, then when you move a little distance away, you will see that you have achieved the desired effect.

Correct proportions

The proportions of red and yellow paints depend solely on what shade you want to get as a result. So, when mixing paints in equal proportions, the result is a classic orange color. In order for the final orange to be more golden or yellow-orange, yellow paint must predominate. While to get a rich fiery orange, more red should be added. You can also soften the resulting shade of orange by adding a little white paint, then you will get a lighter, pastel tone. But to darken the tonality, it is better not to use black, since it does not so much darken as it drowns out the color spectrum. To achieve a darker shade of orange, it is recommended to use a little dark gray.

Conclusion

The principle of obtaining orange paints is quite simple; it is enough to know the RGB model and mixing principles to make the most durable composition. The type of work, be it painting or decorating a room, does not change the method of obtaining orange flowers.

Thanks to modern technologies, interior designers become real wizards. In the blink of an eye, they will make any room stylish and original. IN Lately More and more attention is being paid to color design. The most popular are non-standard shades that can be obtained by mixing colors.

Process Basics

Manufacturers of paints and varnishes presented a fairly wide range on the market. But it’s not always possible to choose what suits the interior perfectly. Combining several shades will help save time and money.

In many specialized stores you can use the services of a specialist who will help you make the desired color. But if you know the basic rules of how to mix dyes, you can do it yourself at home.

When mixing, you need to remember one important rule: you cannot combine liquid products with a dry mixture. They have different indices, so the coloring composition may eventually curdle.

The most interesting part of the process is creating the desired shade. There are four primary colors:

• blue;
• red;
• green.

By mixing them you can get any others. Here are some illustrative examples:

1. You get brown if you combine red and green. To do more light shade, you can add a little white.
2. - the result of mixing yellow and red.
3. If you need green, you need to combine yellow and blue paints.
4. To get it, you need to mix blue and red.
5. Red and white will result in pink.

This way you can mix endlessly.

Mixing acrylic-based materials

Designers love acrylic paints the most. They are very easy to work with, and the finished coating has excellent water-repellent properties. Their use has several nuances:

1. The working surface must be perfectly flat and smooth. To do this, it needs to be sanded.
2. It is important that the paint does not dry out.
3. To obtain an opaque color, use undiluted paint. Conversely, you can add a little water for transparency.
4. To be able to slowly select the desired color, it is recommended to use. Thanks to it, the product will not dry out so quickly.
5. Use the edge of the brush to distribute the paint.
6. Mixing is best done with a clean instrument. In this case, the colors should be directed towards each other.
7. To make a light tone, you need to add white dye to the solution, and to get a dark one, add black. It is worth remembering that the palette of dark colors is much wider than light ones.

Here are some examples of mixing acrylic-based paints:

1. Apricot color is obtained by mixing red, yellow, brown and white.
2. The manufacturing recipe involves combining brown and white. If you want a bright beige, you can add a little yellow. For a light beige shade you will need more white.
3. Gold is the result of mixing yellow and red colors.
4. Ocher is yellow and brown. By the way, it is considered popular this season.
5. can be done by mixing green dye with brown.
6. To get purple you need three different colors: red, yellow and blue.

Mixing oil paints

Oil-based paints are more fluid, which necessitates more thorough mixing of the compositions if tones are mixed. The specificity and properties of oil colors provide the following advantages:

• the tone will be the most uniform, so the paint is perfect for decorating any surface;
• If desired, you can leave veins in the paint, which will allow you to create unusual effects on the canvas or wall.

Stirring the oil

Before work, it is important to evaluate whether it is possible to combine individual tones with each other, what will happen in the end. If you introduce a little glossy paint into matte paint, the result will be inexpressive. Adding matte paint to the shiny one helps make the latter a little more subdued.

Brown tones

Red tones

1. The basis for this is considered to be White color. Red is added to it. The brighter the desired shade, the more red you should add.
2. To get a rich chestnut color, you need to mix red and black.
3. Bright red-orange color - red and a little yellow. The more of the latter, the paler the result will be.
4. You can give the dye a purple tint by mixing a few drops of bright blue and yellow colors and red pigment.
5. To create, according to the recipe, you need to mix bright red + white + brown + blue. The more white, the pinker the hue.

Deep green color is formed by combining yellow and blue tones. The saturation of the finished dye depends on the amount of each of them. To create shades, you need to add other colors to green:

1. You will need white.
2. To obtain an olive color you need green and a few drops of yellow.
3. The shade of grass can be obtained by mixing green with blue. Yellow paint will help to even out the color.
4. The color of the needles is the result of mixing green with black and yellow.
5. Gradually mixing green with white and yellow, you can create an emerald tone.

Violet tones

Purple is made by mixing blue and red. You can also use blue and pink paints– the final color will be light, pastel. To darken the finished tone, artists use black paint, which is added in very small portions. Here are the nuances for creating shades of purple:

• for light purple, you can dilute the finished color with white in the required ratio;
• For purple, you need to add more red paint than blue.

Orange color

When creating classic orange, combine one part of yellow and red paint. But for many types of paint you have to use more yellow, otherwise the color will turn out too dark. Here are the main shades of orange and how to get them:

• for light orange use pink and yellow, you can also add a little white paint;
• for coral, dark orange, pink, and white are required in equal proportions;
• for peach you need colors such as orange, yellow, pink, white;
• for red, you need to take dark orange and a little brown.

Important rule

Many people wonder: is it possible to mix paints and varnishes? different manufacturers? It is advisable that the dyes being mixed are manufactured by the same company. It's even better if they come from the same batch. It is not recommended to mix dyes from different companies. They often have different properties, such as density, brightness, etc. Because of this, the finished coating may curl.

If you want to take a risk, you can combine a little bit of one and the other paint and apply the resulting solution to the surface. If it thickens or clumps, the experiment is a failure.

Computer help

You can mix several colors correctly using special computer programs. They help you see the final result and determine in percentage terms how much of a particular tone needs to be added. Such programs will help you figure out what shade you can get from the products that are available. They consist of several elements:

1. A button that removes tones from the set.
2. Color names.
3. Lines of input or output to or from a calculation.
4. Samples.
5. A button that introduces colors into a set.
6. Result windows.
7. New selection window and list.
8. Composition of the finished dye in percentage terms.

Mixing several different colors is a fairly common technique among designers. Unusual shades will help to decorate the interior favorably, make it original or even unique. You can even mix dyes at home. There are many recipes for creating one shade or another. For example, to get beige you need to combine white and brown, and to get pink you need to combine white and red.

It is recommended to always have a thinner on hand that will prevent the paint from drying out quickly. You should not mix products from different manufacturers, because the result will be a poor-quality coating. To find out the final result of mixing, you can use a special computer program.

Whatever you say, this color is magical, but it evokes dual feelings: on the one hand, it is a kind of sadness, and on the other, peace and tranquility. In this article we will look at how to get blue by mixing paints. Let's find out what shades exist and what they are called. Let's consider what percentage is needed to solve the problem set before us: how to get Blue colour?

Blue color. Psychological perception

It is this shade that has attracted humanity since ancient times. He was always given special attention. So in Ancient Egypt the process of sacrifice to the Gods was depicted in this color. In astrology it corresponds to the planet Venus. In esotericism it is used for meditation, concentration, and also for the process of self-knowledge. IN modern world psychologists have an ambivalent attitude towards this tone: on the one hand, it promotes concentration to achieve a set goal, and on the other hand, it can separate a person from reality and introduces emotional coldness into the worldview.

In psychology, various color tests are used, and one of the most effective is the Luscher test, according to which the tone we describe symbolizes calmness and self-satisfaction. This test can determine a person’s stress tolerance and communication abilities. Each time the test amazes with its accuracy; like a faithful friend, it can give answers to questions that have been brewing inside for a long time.

Shades of blue

Our described tone is noble and stylish. It hides the peace of the cold sky and the raging passion of the sea. How to get blue? Mixing colors will give a large number of related tones and halftones, the percentage formula is varied. There are many shades of it. And how beautifully they are called! Based on the names alone, you can understand how much we love this shade, how it inspires and gives strength. So, as an example, we give the following names of shades of blue: cornflower blue, dove blue, Niagara color, cyan, ultramarine, heavenly, sea wave, light blue, azure, Persian blue, royal blue, indigo, Prussian blue, sapphire, blue-black. Here are the main shades of the tone we are describing. In addition to them, many semi-shades can be distinguished, that’s how multifaceted this tone is.

Even any shade can have different characteristics: blue is frivolous and playful, because it is not for nothing that they say “blue dream”, in other words, unrealistic and unrealistic. But the shade “indigo” is identified with highly developed mental abilities. Children who are mentally gifted are often called “indigos.” It is also worth taking into account a person’s tendency in clothing and in choosing an interior in favor of the specified tone, and the first thing that can be said about him is that this person has an analytical mind. But let's return to the main question: how to get blue?

Mixing colors

After all, he is primary color, but we can get a large number of its shades using different tones. So how do you get blue when mixing colors? Consider getting "Royal Blue". To do this, you need to use blue as the main tone, adding to it a small part of black and a drop of green. As a result of this mixing, the desired shade should be obtained. How to get blue, but a brighter shade than the previous one? To do this, we use the same colors that we described above, but in this case we need to halve the amount of black. The result of mixing should be a beautiful dark blue shade.

Now let's look at what colors to get the blue color of the sea, a shade of turquoise. To do this, it is also necessary to use the main shade of our tone, and the additional one will be a green tone, taken in a ratio of one to three. You should get an unforgettable color of the sea, eye color beautiful girl, mysterious and deep, simultaneously exciting and calming. Now I would like to figure out what tones are needed to get a Wedgwood blue. In this case, the peculiarity is that the main color will be used not blue, as was previously the case, but white. To the white original tone you need to add half of our described tone. Considering the amount of base color, and as a highlight or as a cherry on the cake, add a drop of black. The result should be a peaceful, calm shade of the same tone we adore.

Let's consider this option: how to get a blue color by mixing orange colors in a very small amount with our main tone, which in this recipe we define as the original one. The result of this operation should be a heavy shade, one might even say menacing. The result obtained is identified with a dirty and harsh sky during a wild storm, when the sea roars like a wild beast, and the wind howls and tears the sails of ships.

Blue in nature

What colors are needed to produce blue in nature, you ask? In our real world, at the level of physics, this tone is perceived by the human eye in the range of 440 - 485 nm. In other words, spectral blue color is felt under the influence of electromagnetic radiation with a wavelength whose digital value is indicated above.

Blue paint

How to get blue color artificially, you ask? As you know, natural dyes of this shade are very rare and therefore valuable. One of the dyes of the aniline series is fuchsin. Its significant drawback is that it is far from the beautiful blue tint that one would so much like to achieve; in this case, magenta gives a bluish-red tone. The result of waiting will make you disappointed.

Conclusion

In conclusion, to summarize what has been said, I would like to note that the main question of our article is how to get blue. Mixing colors in different proportions will be the answer, but do not forget that today acrylic paint of the described shade can be classified as dark blue with a purple tone. This type of shade is called "ultramarine". Moreover, the issue of mixing paints is relevant for young artists, for whom, in addition to theoretical information, practice is important. The ability to form your own style, still based on theoretical knowledge, is one of the main tasks. I would like to believe that this material will be useful and interesting.

Mixing colors is one of the most difficult procedures that a person who decides to make repairs on their own may face the need to perform. The point is that it is very important to know what colors to mix to create a certain tone. It should be immediately noted that it is better to purchase white paint and tint it in a store using a special machine, so the tone will be uniform. If you decide to do everything yourself, then you can read more about how to mix colors correctly.

These materials are universal, they are used for many purposes: with their help you can simply paint walls, paint stained glass windows, apply designs on the wall and ceiling. In general, the scope of their use is limited by imagination. The compositions are easy to use and adhere well to the surface. But if you decide to paint a multi-component image on the wall, then buying paint in all the necessary colors will be too expensive, and after completion of the work there will be a large amount of unnecessary material left. In this case, it is better to buy a base series, and mix to create certain shades acrylic paints.

Main color range

More from school days Everyone knows: when you combine yellow and red, you get orange, but if you add blue to the same yellow, you get green. It is on this principle that the table for mixing acrylic paints is built. According to it, it is enough to purchase only the primary colors:

• white;
• black;
• red;
• brown;
• blue;
• yellow;
• pink.

You can simply mix acrylic paints of these tones to get most of the existing shades.

Basics of mixing according to the table

To properly mix materials, you cannot do without a table. At first glance, it is easy to work with: to get the desired result, you just need to find the color and see what components are required. But the color mixing table does not indicate the proportions, so it is necessary to gradually add tinting material to the base paint and apply the mixture to some unnecessary product: a sheet of plywood, drywall, and so on. Then you need to wait until the material dries. If the color matches what is required, you can begin work on the main surface.

Coloring technique

Now about how to get colors. By mixing acrylic materials, you can achieve the formation of two main tones: light and dark. Basic tones: earthy, green, orange, purple. To create color, it is recommended to follow certain rules:

1. Light. In this case, the main material is titanium white, to which one or two tinting compounds are added. The less additional paintwork materials are used, the lighter the tone will be. This is how you can make most shades of a light palette.
2. Dark. To create shades of this type, do the opposite. Before mixing colors, you need to prepare the base tone; black dye is gradually introduced into the base. When working with black paint, you need to be careful because it can make the color look muddy rather than dark.
3. Green. This shade is not in the main palette, so you will need to mix yellow and blue. The exact ratio can only be determined experimentally.
4. Violet. This is a cool color that is obtained by mixing blue with pink or red. In some cases, you will also need to add black to darken the material.
5. Orange. To create this color you need to mix red and yellow. For a richer orange, it is recommended to add more red and vice versa. If you want to create a soft color, for example, coral, then you need to lighten the material with white. Can I add dark dyes? Yes, you can, but mixing colors may result in a muddy tone.
6. Earthy. Here the main color is brown. By adding various shades to it, they get a color from beige to dark wood.

Rules for working with the palette

To begin, you will need a basic set of paints, brushes, a container of water and a palette (you can take any surface, including school supplies for drawing).

It is recommended to place white in the center, since it is used in creating most shades. Dyes of the main color range are placed in the recesses around (if any). You need to mix carefully, gradually adding tinting material and constantly checking the result. After mixing the colors, the brush should be rinsed in a container of water.

On a note! Working with materials based on acrylic resins using a table and palette is quite simple. The main thing is to practice more, the result will get better each time.

Oil paints

If we compare this material with watercolor or acrylic, then oil is more fluid. Because of this, you need to mix compositions of different colors very carefully. On the one hand, this is a drawback, but on the other hand, this feature allows you to obtain the following effects:

• If thoroughly mixed, a uniform tone will be obtained. This material is perfect for both complete painting of surfaces and partial decoration.
• If you mix partially, then different colored veins will appear on the coating.

Mixing

Now about how to mix oil paints. A chart is also used to mix oil-based paint colors. It indicates the colors obtained by combining various tinting components. In addition, here you can find such an indicator as a combination of shine. If you add a little gloss to a matte base, there will be practically no result, but if you do the opposite, the shine will be slightly muted.

Mixing methods:

1. Mechanical. In this case we're talking about about mixing two or more different-colored materials in one container. Color saturation is controlled by the number of compositions of bright shades. The desired color is created even before the wall or ceiling is processed.
2. Color overlay. Gradual application of several strokes on top of each other.
3. Optic. This is the most complex method, which is available only to specialists. It involves mixing glossy and matte bases while applying paint to the surface. You can mix paint colors only on the surface being treated, otherwise you will get a more even tone.

Peculiarities

The first method fully corresponds to the data in the table. When it comes to color application, the result is unpredictable. One of the most simple options optical illusions is glazing: a dark tone is applied to the surface, after it dries, paint is applied a little lighter, and then completely light. As a result, each color will be visible through the top layers.

So there is no specific pattern. To find out which colors need to be mixed, it is not enough just to take and look at the table; it is important to constantly practice and not be afraid of experiments. This way you can create a new effect that will make the interior unique. It is also important to remember that a mixed shade is very difficult to replicate, so you should remember the proportions.

Now the question of how to mix paints correctly does not seem so difficult.

Learning to draw: mixing acrylic, oil, watercolor paints. All kinds of shades from three primary colors.

Without creativity human life empty and uninteresting. Painting, like music, is learned not only in order to be realized in life, but also in order to find an outlet in life, a hobby that will bring joy and peace to life. And where there is drawing, so is mixing colors. This is exactly what this article is dedicated to. In it we will tell you how to mix and obtain new colors and shades of the most common paints in painting.

How to properly mix acrylic, oil and watercolor paints to obtain the desired color: table, proportions

Mixing acrylic paints

We suggest that you familiarize yourself with the lesson famous artist and a called teacher, author of Acrylic Painting with Lee Hammond. Lee Hammond warns that although we supposedly know from childhood that mixing red and blue will get purple, acrylic paints have a different pigmentation and most likely you will find brown on the palette.

Important: read the pigments on the packages. Have you seen on store shelves there are up to 15 types of the same shade? Do you think this is to fill a display case? No, it is the same color with different pigments. Therefore, we write down or photograph on a smartphone the color - the necessary pigment - and with this we go to the store to replenish the paints.

Also note that the pigments are transparent, translucent and dense in consistency. Therefore, you can buy completely different structures from the same paint manufacturer. This is not a defect, but the properties of the pigment.

So, in order to get an almost full range of colors, only 7 colors are enough. For beginners, it is recommended to purchase exactly these colors, and in the future, at your own discretion, purchase additional shades.

Please note that we do not specifically translate the names of the primary colors so that you can name them in the store and purchase the necessary pigments:

• Base: Cadmium Yellow Medium
• Base: Cadmium Red Medium
• Main: Prussian Blue
• Additional: Alizarin Crimson
• Additional: Burnt Umber
• Neutral: Ivory Black
• Neutral: Titanium White

We bought, prepared the canvas for the experiment and move on to the magic.

Experiment one - mix each color with white and get new, amazing pastel and delicate shades. We provide a table of strokes with a caption of what we mixed.

Well, now, from left to right, from first to bottom, let’s look at the shades that we managed to get: fawn; peach or as it is also called coral; light pink; beige; sky blue; gray or light asphalt.

Now we try to mix all the colors with black, the result is in the table below.

And we got these colors: khaki or dark green; chestnut; plum; deep brown; Navy blue.

But this is all simple, now let’s move on to a more complex version of mixing acrylic paints, but an interesting one! Mix and get all shades of green.

As we already did, we mix the two colors that are under the stroke and get exactly this shade.

Additionally we received: olive green color; a gray-green tint reminiscent of asphalt after rain reflecting the green crowns of trees; bottle green; mint.

The next step is purple and violet tones and midtones. In order to obtain such shades, you will need to have Prussian blue or alizarin pink or cadmium red in the work kit. Two examples for mixing: Prussian Blue + Cadmium red medium or Prussian Blue + Alizarin Crimson.

The colors we got were chestnut, rich warm grey, plum and a touch of lavender.

Now add white pigment and stir, add another drop to each option. Notice what a riot of color appears in your hands!

Sunny shades. This is what artists like to call shades of orange; these are wonderful uplifting tones. They are made by mixing red with complementary colors.

On this table we got: orange as it is, peach, brick, coral.

Earthy tones can be achieved by adding burnt umber (international meaning Burnt Umber). If there is a need to get pastel shades of these tones, then just add a drop of white pigment.

In this case, we got earthy shades: umber; brick; dark turquoise; dark sepia; dirty beige; pastel lilac; steel blue; Warm grey.

Mixing oil paints

IN oil paints the situation with the palette is a little simpler and one pigment is used in one color, so we will not give the main colors, but will leave only the name of the color. The rules that we remember from childhood are precisely the rules of oil paints.

Mixing watercolor paints

Watercolor paints are mixed according to the same principle as oil paints, except that watercolors are translucent and the shades are more muted. We recommend working through the table above first, and only then moving on to drawing on canvas.

Basic colors for mixing paints

There are only three primary colors in paint mixing. These are red, blue and yellow. White and black are considered additional. Thanks to these colors you can get absolutely all shades of the rainbow.

This article does not provide ready-made solutions, because it is impossible to squeeze out paint or smear a certain amount of milligrams; this article gives a direction in which you can work and develop. Try, experiment and you will definitely end up with a delicious creation. And painting works much better than any psychologist, relieves stress, distracts from problems and helps you see the beauty in the ordinary!

Video: How to get brown, purple, blue, red, beige, orange, pink, gray, lilac, black, turquoise, mint, green, olive, blue, lilac, pistachio, khaki, yellow, fuchsia, cherry, marsala, white when mixing paints?